Mon - Fri: 09:00 - 20:00,   Sat - Sun: 10:00 - 16:00
Request a call Quick request

The main advantages of the products of Expert-Cable LLC

For more than six years, Expert-Cable LLC has been manufacturing and selling cable and wire products, which are in demand due to their proper quality. Due to their high performance properties, our products are approved for use in hazardous areas. The company has all the conditions and capabilities to produce truly reliable and high-quality products.

Sergei Koroteev, Head of the Training Center at the EXPERT CABLE factory, will tell us how it became possible.

Tell us, what really distinguishes your company in such a highly competitive market?

For every consumer, it is important that the product purchased meets the advertised specifications and is reliable and of good quality.
This is what we at our company are all about.

First of all, it’s our wonderful team.

Highly-qualified personnel

The staff at EXPERT-CABLE are professionals in their field. All our employees undergo in-house training and subsequent certification. Each site operator is highly qualified, with both theoretical and practical knowledge. If desired, any employee can upgrade his or her knowledge with the support of the administration. Highly responsible staff, state-of-the-art technology and new equipment guarantee quality and success. So our slogan “Made by Experts” is not just words, it is our ideology.

Secondly, in addition to the fact that each site is staffed by a craftsman, it is very important that the equipment is up-to-date.

Cutting-edge equipment

Our Factory is young, so naturally we have been buying equipment “for future use”. We can produce cables of almost any design. The Factory has modern production equipment at its disposal, which is on a par with world analogues, as well as powerful testing and measuring facilities. This ensures that full product quality control is carried out during the development and production of cable products.

We carry out tests on cable and wire products and materials to determine: electrical performance, physical and mechanical properties, resistance to external influences, etc.

This includes materials that are purchased from third parties. The laboratory checks the original product against its declared quality, despite the existence of certificates, as it is responsible for the final product.

All this enables us to produce reliable cables of various types and grades.

Thirdly, we only manufacture the current conducting conductors from raw materials of high-quality. The quality of the current conducting conductors, or more precisely its composition, determines the resistance in an electrical circuit. The fewer the impurities in the metal, the lower the resistance, therefore the lower the electrical losses, the lower the energy costs. The quality of the metal also determines the degree to which the cable is heated. The “purer” the metal, the less it heats up, the more lasting and reliable the cable line is.

Another achievement is the launch of Upcast® casting and serial production of rolled copper wiring with diameters from 8 to 25 mm. Production volumes on these lines are increasing every year.
As raw materials, we use the highest quality metals without any impurities — pure copper and aluminium.

In quadruplets, we use modern, reliable insulation materials:

  • high-modulus ethylene-propylene rubber;
  • PVC compound;
  • thermoplastic elastomers;
  • polyethylene compositions;
  • halogen-free material.

All batches of purchased raw materials are thoroughly checked for quality compliance.

In conclusion, I would like to point out once again the product control system. Before a cable and wire products reach the end customer, they undergo a series of measurements and tests. When copper is smelted in the laboratory, its electromechanical properties are tested, while in the drawing process, the relative elongation of the wire, diameter and resistance are checked. The filling, evenness and thickness of the insulation layer are monitored when the insulation is applied. The quality of the insulation coating is tested for voltage-breakdown. A Quality Certificate with acceptance test results and a Certificate of Conformity are issued for each batch.

The cable is labelled with information about the manufacturer, the cable brand, its characteristics, and the technical documentation on which it is based. At the request of the customer, we can choose the color of ink and expand the applied information. The labelling is applied to the entire cable length, which serves as an additional safeguard against counterfeiting, and cable length labelling can prevent theft at facilities.
The cleanliness and orderliness of the halls and premises of the Factory indicate our principle of strict and lean production, which complies with the requirements of the regulatory authorities.

It will be important to potential partners that our Expert-Cable LLC has ISO 9001 certificate.

So if you’re looking for high quality cable and wire products, you’ve already found them! EXPERT-CABLE factory means reliability in every meter. Made by experts.
Contact us and ask your questions — we are happy to answer any questions you may have.
Make your orders and we will design and manufacture a cable to your requirements and support you from design through to installation of the cable lines.

Back to the list